Crystalline barriers may unlock better superconducting quantum circuits. Functional nitride-based Josephson junctions have been created using molecular beam epitaxy, a technique for growing thin films. This niobium nitride/aluminum nitride/niobium nitride structures demonstrate coherent electron flow despite an incredibly thin aluminum nitride barrier and achieve a key current density of approximately 17A/cm2. A working electrical component called a Josephson junction has successfully been created using carefully grown crystal layers.
This type of junction is vital for building advanced superconducting circuits and overcomes previous restrictions on material choices, opening possibilities for more complex designs within these circuits. The new technique enables integration of superconductors alongside other technologies like transistors and lasers all fabricated on one chip. Researchers at Cornell University, Stanford University, Auburn University and Yale University have achieved a breakthrough in superconducting quantum circuits by creating working electrical components called Josephson junctions using meticulously grown crystal layers.
A Josephson junction acts like an extremely efficient gate controlling electron traffic between two superconductors without resistance under specific circumstances, a vital component for advanced circuit designs. This success overcomes previous limitations regarding suitable materials and paves the way for integrating these ‘superconducting’ elements with other technologies such as transistors and lasers all fabricated onto one chip via techniques akin to building with LEGOs at the atomic level.
Epitaxially Grown Nitride Junctions Demonstrate Functional Superconductor-Insulator-Superconductor Behaviour
A critical current density of approximately 17A/cm² marks an improvement over previous attempts at creating functional nitride crystalline barrier Josephson junctions with molecular beam epitaxy or metal, organic chemical vapour deposition. Earlier methods failed to produce working superconductor-insulator-superconductor devices. This breakthrough establishes underdamped SIS behaviour, essential for advanced electronic components like transistors and lasers, by fabricating niobium nitride/aluminium nitride/niobium nitride trilayers that support coherent electron flow despite an incredibly thin, roughly 4.5nm aluminium nitride insulating layer.
Realization of these all-epitaxial structures unlocks new possibilities in superconducting quantum circuit design by expanding material choices and enabling potential monolithic integration alongside other active technologies. The critical current multiplied by the normal resistance (IcRn) yielded a product around 2.5mV, confirming efficient superconducting behaviour within these newly fabricated junctions.
A superconducting gap voltage reaching approximately 3.7mV also revealed electrons pairing up to carry current without energy loss in both niobium nitride layers. Temperature dependence analysis showed evolution consistent with established Bardeen-Cooper-Schrieffer theory, the standard explanation for superconductivity, resulting in a ratio of 2Δ/kBTc around 3.96 where Δ is the superconducting gap and Tc represents the critical temperature.
Atomic Layer Control of NbN-AlN Heterostructures
Molecular beam epitaxy (MBE) proved central to this advance, allowing careful growth of incredibly thin crystal layers one atom at a time, akin to building with LEGOs at the atomic level. The team employed MBE to deposit alternating films of niobium nitride (NbN) and aluminum nitride (AlN), creating layered structures crucial for Josephson junctions: tiny switches that allow electricity to flow between two superconductors without resistance under certain conditions. Precise control over material deposition is vital because imperfections in crystalline barriers can disrupt superconductivity; crafting highly ordered AlN layers only around four atoms thick enabled coherent electron tunneling despite such extreme dimensions.
Scaling Nitride Junction Fabrication Presents Key Manufacturing Challenges
This success unlocks exciting possibilities, including new superconducting materials combinations and even integrating these circuits with transistors or lasers fabricated on the same chip. However, a key question remains unanswered within this initial work: reproducibility at scale. Demonstrating consistent performance across larger wafers is essential before moving beyond laboratory prototypes towards viable manufacturing processes. Detailed structural analysis using X-ray diffraction confirmed continuous crystalline layers while achieving coherent tunnelling through just 4.5nm of aluminium nitride, these initial devices remain small-scale laboratory prototypes requiring significant engineering for reliable mass production or integration into complex circuits.
The researchers successfully created functional Josephson junctions, tiny electrical switches, using niobium nitride and aluminum nitride grown by molecular beam epitaxy. Despite an approximately 4.5 nanometer thick insulating barrier, the resulting structures exhibited superconducting behavior with a critical current density around 17A/cm2 and demonstrated expected characteristics like hysteretic current-voltage curves. This achievement demonstrates that crystalline barriers can be fabricated using MBE techniques currently used in semiconductor manufacturing. The authors note this work expands possibilities for new materials combinations within these devices and potential monolithic integration with other electronic components.
👉 More information
🗞 Nitride crystalline barrier epitaxial SIS Josephson junctions by MBE
✍️ Manas Verma, Anand Ithepalli, Amit Rohan Rajapurohita, Eegene Clara Chung, Naomi Pieczulewski, John G. Wright, Jimy Encomendero, Rishabh Singh, Chandrashekar Savant, Hangwang Yang, Anthony Hyatt, Jaehong Choi, Thomas Varghese, Kushagra Aggarwal, Valla Fatemi, Gregory D. Fuchs, David A. Muller, Huili Grace Xing and Debdeep Jena (Cornell University); David A. Garcia-Wetten and David Schuster (Stanford University); Danqing Wang and Hong X. Tang (Yale University); Archit Shah and Michael C. Hamilton (Auburn University); Paul B. Welander (Affiliation: SLAC National Accelerator Laboratory); Apurva Mehta (Affiliation: Linac Coherent Light Source)
🧠 ArXiv: https://arxiv.org/abs/2611.14968




See today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals.
