Quantum collective coupling reaches 21.3 MHz with 120 trapped atoms

Researchers affiliated with Shanxi University and Hefei Qianyuan Quantum Technology Co., Ltd. have achieved a collective coupling rate of 21.30 ± 0.23 MHz by linking 120 individually trapped cesium atoms to a single optical cavity. This scaling of the interface, matching 192 optical tweezers to a millimeter-scale cavity, demonstrates a step toward building larger, more powerful quantum networks. This effective coupling remains consistent even with variations in atom placement, suggesting a predictable relationship between atom number and overall system performance.

Millimeter-Scale Fabry-Pérot Cavity Matches 32×6 Tweezer Array

A millimeter-scale Fabry-Pérot cavity was successfully matched to a two-dimensional array of 192 optical tweezers, enabling the collective coupling of cesium atoms within the cavity’s interaction region. This precise alignment is critical for building scalable neutral-atom quantum registers, where individual atoms serve as qubits and the cavity mediates interactions between them. The experimental setup used crossed acousto-optic deflectors to generate the tweezer array, a technique refined through optimization, optical feedback and atomic fluorescence feedback to achieve a mean cesium loading probability of approximately 58%.

This loading efficiency is essential for maximizing the number of atoms available for collective coupling. The researchers focused on a 32×6 tweezer array, carefully aligning its geometry with the calculated coupling profile of the cavity. The cavity coupling envelope, which dictates the strength of interaction between atoms and the cavity’s electromagnetic field, constrains the array’s footprint.

Measurements revealed a tweezer displacement of approximately 4.274 μm/MHz along both axes, a parameter important for precise positioning of the atoms within the coupling region. This level of control allows for the creation of a stable and well-defined quantum system. The calculated coupling envelope extends farther axially than radially, prompting the team to elongate the array along the cavity axis to accommodate more sites while maintaining stable trapping conditions.

Grouping cavity transmission spectra by the number of atoms present at each tweezer site revealed resolved normal-mode doublets, a clear indication of collective coupling. Specifically, analysis of data from a group containing 120 atoms yielded an effective collective coupling rate of Geff/2π = 21.30 ± 0.23 MHz. This coupling rate represents an advancement in the field, bringing quantum networks closer to practical realization.

The observed coupling strength is consistent with square-root scaling with atom number, despite spatial variations in single-atom coupling. A model based on the calculated coupling profile and measured site loading probabilities predicts minimal change in the mean squared coupling per occupied site between 97 and 120 atoms. This consistency demonstrates the robustness of the system and its ability to maintain uniform coupling even as the number of interacting atoms increases.

The researchers determined the orientation of the axial array direction by mapping the coupling of a single trapped atom to the cavity, scanning the tweezer radially and extracting the coupling from the cavity transmission spectra. The experimental system uses a 1064 nm trapping beam directed through a fiber-coupled acousto-optic modulator and the crossed acousto-optic deflectors. Relay optics then direct the diffracted beams into a vacuum cell perpendicular to the cavity axis.

An objective with a numerical aperture of 0.44 focuses the beams near the cavity center, forming the tweezer array. A locking beam at 847.7 nm, employing the Pound-Drever-Hall technique, stabilizes the cavity length, while a probe mode tuned to the cesium cycling transition near 852.356 nm is used for measurement. A blue-detuned beam near 851 nm forms an intracavity lattice, tightening axial confinement and localizing the atoms near probe-mode antinodes.

Distinct pairs of tones can impart the same net optical frequency shift to beams directed to different sites, allowing those beams to interfere where their fields overlap. The axial and radial tone spacings must therefore be chosen together, taking into account both the array footprint within the cavity coupling region and the optical frequency separations between the diffracted beams. The corresponding maximum single-atom cooperativity is calculated to be 3.6, indicating a strong interaction between individual atoms and the cavity mode.

This high cooperativity is a key factor in achieving the observed collective coupling rate and is essential for building efficient quantum gates. The ability to precisely control and couple a large number of atoms within a single cavity mode represents a step toward realizing scalable and robust quantum information processing.

120-Atom Collective Coupling Reaches 21.30 ± 0.23 MHz

Analysis of these spectra, categorized by the number of atoms, revealed a peak effective collective coupling of 21.30 ± 0.23 MHz when 120 atoms were coupled to the cavity mode. The model’s prediction, detailed in the paper, suggests that the system’s performance is not significantly degraded by the non-uniformity of atomic placement. This is important for scaling the system to even larger numbers of atoms. Over the range of 97 to 120 atoms, the observed collective coupling strength, Geff/2π, varied from 18.9 to 21.3 MHz.

The spatially weighted coupling model employed to estimate the impact of varying single-atom couplings defines the collective coupling as the quadrature sum of individual atom couplings, Geff = √(sum_(i = 1)^Mni|gi|^2), where M is the total number of sites, ni represents the occupation of each site, and gi is its single-atom coupling strength. The model accounts for the spatial coupling factor, hi = e–x_i^2/w^2| cos(Δ kz_i)|, where w is the cavity waist radius and Δk represents the axial momentum mismatch.

Site occupations were modeled as independent Bernoulli variables, using the measured loading probabilities as parameters. The resulting prediction indicates that the mean squared collective coupling grows nearly linearly with atom number, despite the spatial variation in single-atom coupling. The root-mean-square prediction and the square-root fit exhibited nearly identical shapes over the analyzed interval, suggesting a robust relationship between atom number and collective coupling.

The measured scaling coefficient was approximately 59% of the ideal spatially weighted reference, with potential discrepancies attributed to finite axial motion, atom loss and imperfect internal-state preparation. The researchers suggest potential applications for this technology in quantum computing.

State-selective coupling could enable cavity-assisted readout of individual atoms within a quantum register, enhancing the precision and efficiency of quantum operations. the architecture could facilitate optical links between registers, extending the functionality of the cavity beyond collective operations within a single processor to enable quantum communication between multiple processing units. “With the addition of coherent atom–photon interfaces at selected sites, the same architecture could provide optical links between registers,” the paper concludes, outlining a pathway toward more complex and interconnected quantum systems.

Spatial Variation in Single-Atom Coupling Strength

To establish a baseline for comparison, the theoretical maximum single-atom coupling strength was set at 3.64 MHz, and an idealized spatial profile was used to calculate a reference coefficient of 3.21 MHz. This spatial dependence is described by the equation g(x,z) = gmax exp[-x^2/w_c^2] cos(k_cz), where gmax represents the maximum single-atom coupling strength, wc is the radius of the fundamental cavity mode, and kc is the probe wavenumber.

The researchers carefully aligned the array with the cavity mode using two acousto-optic deflectors, a process guided by single-atom spectroscopy that maps the spatial variation in coupling. The team also employed both camera and atomic feedback to refine array uniformity, critical for maximizing the collective coupling effect.

Analysis of the mean squared spatial coupling factor, AN, revealed a relative change of only approximately 3.3× 10–4 across groups containing 97 to 120 atoms. This minimal variation emphasises the stability of the coupling mechanism and the effectiveness of the experimental design in mitigating the impact of spatial irregularities.

The cavity itself, formed by two mirrors with a radius of curvature of 50 mm, exhibits a finesse of about 8.1× 104 at 852 nm, with mirror transmissions of 0.23 ppm and 76.02 ppm. The fundamental transverse mode has a waist radius of 39.4 μm, defining the spatial region where atoms experience the strongest coupling to the cavity mode.

This level of coupling is a key parameter for exploring photon-mediated many-body dynamics and developing advanced quantum technologies. The square-root fit to the data yielded a value of Geff/(2π) = (1.9073 ± 0.0032) N MHz, further confirming the expected scaling behavior. The axial variation of the Gaussian mode envelope was neglected in their calculations, simplifying the model while maintaining accuracy within the experimental parameters. The team’s work provides an experimental foundation for future investigations into complex quantum phenomena and the development of novel quantum devices.

Cavity-Based Platform for Quantum Registers and Networks

By precisely matching a two-dimensional array to the coupling profile of a millimeter-scale Fabry-Pérot cavity, the team created a platform for exploring many-body physics and developing advanced quantum registers. In each trial, fluorescence imaging determines whether each individual tweezer site is occupied, allowing the cavity transmission spectra to be grouped by atom number.

The grouped spectra exhibit resolved normal-mode doublets, and the group with 120 atoms yields an effective collective coupling of Geff/2π = 21.30 ± 0.23 MHz. The authors state that these results provide “an experimental basis for studying photon-mediated many-body dynamics and developing cavity-assisted readout and optical links between neutral-atom registers.”

👉 More information
🗞 Collective coupling of over 100 individually trapped atoms to a single cavity mode
✍️ Shijun Guan, Guansheng Teng, Zhihui Wang, Pengfei Yang, Pengfei Zhang, Gang Li and Tiancai Zhang (State Key Laboratory of Quantum Optics Technologies and Devices and Institute of Opto-Electronics, Shanxi University, Taiyuan, Shanxi, China.); Zhiguo Huang (China Mobile (Suzhou) Software Technology Company Limited, Suzhou, China.)
🧠 ArXiv: https://arxiv.org/abs/2611.20393

Stay current

See today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals.

Avatar of Dr. Donovan

Latest Posts by Dr. Donovan: