Imec builds a multiplexer for qubits that sips just 200 picowatts

Imec researchers have developed a cryoCMOS multiplexer consuming just 200 picowatts, a record low that directly addresses the scaling challenges of superconducting qubit systems. The device provides < 2 dB insertion loss and > 30 dB isolation across DC-8 GHz. Direct connection to transmon qubits marginally affects coherence times in the range of 100 µs, enabling multiplexing of readout, flux and, in principle, XY drive lines; this work introduces cryoCMOS multiplexers as valuable tools for scalable, high-throughput cryogenic characterization and testing.

CryoCMOS Multiplexers Address Quantum System Bottlenecks

The devices use a fully depleted silicon-on-insulator (FDSOI) commercial technology, optimized for near-zero power consumption at 10 millikelvin. Beyond qubit control, these multiplexers provide a valuable tool for cryogenic characterization and testing of quantum devices.

“This makes a cryoCMOS multiplexer an attractive component for scalable qubit characterization, which is urgently needed for the characterization of a large number of quantum devices fabricated at an industrial scale,” the researchers state.

Record-Low 200 Picowatt CryoCMOS Multiplexer Design

Imec’s design achieves this performance by focusing on a custom-made multiplexer architecture optimized for near-zero power dissipation, a departure from previous implementations. The device supports signal multiplexing for all superconducting qubit processor signal lines, including microwave inputs and outputs for qubit driving and readout, as well as low-frequency flux biasing. Beyond simply reducing power, the multiplexer’s performance characteristics are specifically tailored for compatibility with sensitive quantum systems. The implications of this work extend beyond qubit control and readout to broader cryogenic testing applications.

CryoCMOS Multiplexing Compared to Alternative Technologies

Imec’s new cryoCMOS RF multiplexer consumes just 200 picowatts while operating at 10 millikelvin, a record low that addresses a critical limitation in scaling superconducting qubit systems currently hampered by bulky microwave components. This power consumption represents a 3000-fold improvement over the company’s previous implementation, enabling more densely packed and efficient quantum processors. Alternative technologies for cryogenic time-division multiplexing include BiCMOS, III-V two-dimensional electron gas with superconducting niobium metalization, and Josephson junction-based field effect transistors. But their compatibility with actual qubit operation had not been fully verified until now.

Testing involved three configurations: drive/readout input line multiplexing, readout output line multiplexing and flux-bias line multiplexing. Measurements of energy relaxation and coherence times confirmed the multiplexer can be effectively used for output line multiplexing, accurately capturing coherence times up to approximately 100 µs. The device was also directly connected to the flux line of a superconducting qubit chip and a dedicated low-frequency signal input line to demonstrate multiplexing of low-frequency flux-bias lines, a capability previously questioned due to concerns about 1/f noise in CMOS devices at cryogenic temperatures.

Multiplexer Performance Across DC-8 GHz Frequency Range

Simulations closely mirrored measured performance, with discrepancies likely stemming from crosstalk between printed circuit board traces not accounted for in the modeling process. Continuous monitoring of energy relaxation times T1 and coherence times T2e across three distinct qubits over 12 hours revealed minimal impact from the multiplexer on qubit stability.

Scalable Cryogenic Characterization with CryoCMOS Integration

Imec’s newly developed multiplexer achieves this performance while consuming just 200 picowatts of static power, a record low that significantly eases the demands on dilution refrigerator capacity. The low power consumption is particularly impactful when considering large-scale characterization systems. This compatibility is essential for preserving qubit fidelity during complex characterization procedures and allows for the multiplexing of multiple signal types without significant degradation of quantum information.

Stay current

See today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals.

Avatar of Ivy Delaney

Ivy Delaney

Ivy Delaney has been working with neural networks and machine learning since the mid-nineties, back when a couple of hidden layers and a long afternoon of training counted as ambitious. She has watched the field go from academic curiosity to the thing quietly running underneath everything, and she brings that long view to quantum computing. For Quantum Zeitgeist she covers the ground where the two fields meet. That means quantum machine learning and the variational algorithms it leans on, and it also means the less glamorous but more interesting story of classical machine learning already doing real work inside quantum machines, decoding error-correcting codes, calibrating noisy hardware and learning the error models that simulators depend on. She writes about the hardware those algorithms have to run on too, and about the post-quantum cryptography scramble that the same hardware has set off. Her stories typically start with the paper, whether that is peer-reviewed work, conference proceedings or an arXiv preprint, with the source linked so you can hold a claim up against the research it came from. She is unimpressed by benchmarks that will not say what they beat, and by demonstrations that only work in the press release.

Latest Posts by Ivy Delaney: