A surprising issue emerged during the development of a high-beta 5-cell 650 MHz cavity prototype for the PIP-II project. A “flat” higher order mode (HOM) passband unexpectedly threatened beam stability. Researchers at Fermi National Accelerator Laboratory discovered that cell misalignments could split this narrow passband into individual cell resonances, creating high quality factors and large R/Q values, a previously unaddressed pathway to detrimental effects in superconducting RF cavities. The team successfully redesigned the HB650 cavity to eliminate the problematic passband, demonstrating a solution rooted in a new analytical theory.
High-Order Mode Splitting in PIP-II HB650 Prototype
The team’s analysis revealed that cell misalignments were responsible for splitting a normally unified, “flat” higher order mode passband into these problematic individual cell resonances. The HB650 cavity was successfully redesigned to eliminate the flat HOM passband and prevent the associated detrimental effects. The observed behavior differed from expected outcomes, as the prototype exhibited a set of individual cell resonances around 1,988 MHz instead of the anticipated fifth monopole higher order mode passband.
Axial field distribution measurements, conducted using the bead-pool technique, confirmed the presence of trapped monopole modes within the cavity structure. These localized resonances exhibited very high loaded quality factors because they were weakly coupled to the input coupler, and their electromagnetic fields were confined to individual cells, resulting in high transit time factors and correspondingly large R/Q values. The combination of high quality factor and large shunt impedance amplified the potential for beam disruption and energy loss.
The analytical theory developed alongside the experimental observations explained the origin of this phenomenon and provided a means of mitigation through cavity re-design. Simulations demonstrated that increasing the beam aperture radius to 60 mm and adjusting the parameter βG to 0.92 effectively broadened the bandwidth of the higher order modes. This broadening eliminated the mode splitting into individual cell resonances and ensured sufficient coupling to the input power coupler, achieving external quality factors in the 105 to 106 range.
The team validated these findings by generating a large number of random linac configurations, between 105 and 106, to estimate the probability of longitudinal emittance growth and RF losses per cryomodule. Analysis of these simulated configurations revealed that the re-designed cavity significantly reduced the risk of both longitudinal emittance growth and high cryogenic losses.
The cumulative probability of longitudinal emittance growth in the high-energy section of the PIP-II linac remained acceptably low with the new design, and the probability of significant cryogenic losses was also substantially diminished. “The present design, however, does not pose problems regarding beam longitudinal emittance,” the paper states, highlighting the success of the mitigation strategy. The team’s work extends beyond the specific parameters of the PIP-II project, as the conclusions apply to elliptical cavities as well.
The researchers found that for an a/R ratio of less than 0.3, the bandwidth is small, but rapidly increases for larger apertures. Increasing βG to 0.92 provided a bandwidth exceeding 0.5 MHz, sufficient to eliminate mode splitting and achieve acceptable R/Q values and low external quality factors. The re-optimized cavity shape maintained peak surface fields at levels specified in the initial design, ensuring performance consistency.
Trapped Monopole Modes and R/Q Value Impact
Trapped modes within the 650 MHz superconducting radio frequency (SRF) cavity prototype for the PIP-II project arise from a surprising interaction of electromagnetic fields, concentrating energy in central cells while minimizing it at the ends. This confinement results in unusually high loaded quality factors and large R/Q values, characteristics that can destabilize particle beams and increase cryogenic losses. While high-order mode (HOM) excitation is routinely considered in cavity design, the specific mechanism observed in this prototype, the creation of these “trapped” modes, was previously unaddressed.
According to the paper, these modes originate from the coupling of degenerate modes, specifically TM030 and TM012, within each cell. Electric field maps reveal that in the hybrid mode, fields near the coupling aperture are minimized, effectively isolating cells and preventing energy transfer. Results of simulations for an ideal cavity show an extremely narrow passband with a bandwidth of approximately 40 kHz.
Perturbation Theory for Degenerate Cavity Modes
The work demonstrates that standard perturbation theory, effective when resonant frequencies don’t coincide, fails to accurately predict behavior when these modes are degenerate, necessitating the application of coupled-mode theory instead. This reduction in field strength near the coupling apertures effectively inhibits coupling between cells, creating what the researchers term “trapped modes.” The geometry of an axisymmetric elliptical cavity, with symmetrical cells and small coupling apertures, was used to model this interaction, demonstrating that the total field can be described using equation (1) from the paper.
The model assumes equal apertures and left-to-right symmetry, simplifying the analysis while capturing the essential physics of the mode interaction. The team’s work extends beyond simply identifying the phenomenon. It provides a quantitative understanding of how geometric parameters influence the resulting bandwidth. The redesigned HB650 cavity successfully mitigates this issue. This careful balance of design considerations demonstrates a solution to a newly understood issue that threatened the PIP-II project.
TM010 Mode Interaction in Pillbox Cavities
The analysis of multi-cell superconducting radio frequency cavities revealed that “flat” higher order mode (HOM) passbands, characterized by extremely narrow bandwidth, can become acutely sensitive to even minor perturbations in cell frequencies.
This independence, while seemingly benign, creates a scenario where the field distribution along the cavity becomes exceptionally vulnerable to any slight variation in cell frequencies. Further investigation using an axisymmetric elliptical cavity model confirmed that the principles governing mode interaction in pillbox cavities also apply to more complex geometries. The model, assuming symmetrical cells and equal apertures, showed that the mixing of degenerate axisymmetric modes, specifically TM0n0 and TM0m2, results in hybrid modes with field distributions heavily influenced by the cavity’s geometry.
The electric and magnetic field maps for these hybrid modes, as depicted in the study, visually demonstrate the complex interplay between the original partial modes. To mitigate the risk of these detrimental effects, the analysis suggests that mode degeneracy must be eliminated and partial modes detuned. According to the equation presented, the relative frequency difference between the interacting modes must exceed the coupling between them, a condition that requires careful optimization of the cavity’s design parameters.
One approach involves adjusting the cell length, or βG, provided it does not compromise beam dynamics. However, the researchers acknowledge that increasing the electric field enhancement factor is a potential drawback of some mitigation strategies. The study also highlights the importance of considering the geometric parameters of the elliptical cell, such as its volume and inner surface, in controlling mode interaction.
The initial PIP-II high-beta cavity design, operating at 650 MHz with βG = 0.9, served as a case study for demonstrating these principles. The electric and magnetic field distributions for the hybrid modes of this cavity were analyzed to assess the effectiveness of different design choices in suppressing unwanted mode coupling. The researchers state that “to reduce mode interaction, mode degeneracy should be eliminated and the partial modes detuned.”
👉 More information
🗞 Interaction of degenerate higher-order modes in periodic superconducting rf accelerating structures
✍️ V. Yakovlev, S. Belomestnykh, T. Khabiboulline and A. Lunin
🧠 DOI: http://link.aps.org/doi/10.1103/blpm-g4sl




See today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals.
