Single-particle walks test a design for a multi-orbital quantum simulator

The team proposes an optical superlattice architecture that implements the three-band Emery model, a specific theoretical framework for understanding strongly-correlated electrons, with ultracold fermions. This work demonstrates that single-particle quantum walks can benchmark the resulting tight-binding model, and further investigation reveals a finite-temperature metal-insulator crossover accompanied by antiferromagnetic correlations.

Three-Band Emery Model Captures Cuprate Physics

Allowing for implementation of the three-band Emery model using ultracold fermions, a step toward simulating complex materials, the design of an optical superlattice enables this functionality. This architecture directly addresses a longstanding challenge in quantum simulation: creating realistic multi-orbital Hubbard models, essential for understanding strongly-correlated electron systems. A central difficulty in modeling cuprates lies in accurately describing the interplay between copper and oxygen orbitals; simplified one-band Hubbard models, while useful, fall short of capturing the full range of behaviors.

The three-band Emery model explicitly accounts for these interactions, including on-site repulsive interactions between electrons on copper d orbitals, denoted as Ud and weaker interactions on oxygen p orbitals, Up. Realizing this model in a quantum simulator requires precise local control over these Hubbard interactions and the ability to design orbital-dependent band structures, a feat previously difficult to achieve. The new optical superlattice overcomes these hurdles by combining lattice beams with controllable interference.

Researchers applied a Hamiltonian learning protocol enabling to infer effective single-band Hubbard models from experimental realizations of Emery models. This protocol begins with a three-band system subject to weak, random pinning potentials on the copper sites, then releases those potentials to evolve the system under the Emery Hamiltonian. The paper details the process of calibrating the simulation.

The protocol aims to identify parameters, specifically, t, t’, and U, that accurately capture the low-energy physics of the Emery model. The work also predicts a finite-temperature metal-insulator crossover accompanied by the onset of antiferromagnetic correlations, features accessible in current experiments.

Optical Superlattice Architecture for Fermion Control

An optical superlattice architecture engineers orbital degrees of freedom that reproduce key features of the cuprate band structure, while enabling independent control of orbital-dependent interactions and charge-transfer energy. The architecture uses interfering and non-interfering lattice beams to engineer orbital degrees of freedom, replicating features of the band structure found in these materials.

The system’s ability to tune parameters relevant to cuprate superconductors, including orbital-dependent Hubbard interactions, relies on a bichromatic approach. Combining previously implemented techniques, phase-stabilized and bichromatic lattices, the design avoids the need for digital mirror device-based potential engineering, a method that can introduce disorder and unwanted couplings.

The potential for manipulating charge transfer energy, Δpd, is highlighted as particularly significant, as this value appears to correlate inversely with the superconducting critical temperature Tc, suggesting oxygen charges actively contribute to the emergence of correlated phases. The researchers emphasize that their architecture does not require complex potential engineering, reducing the risk of introducing disorder and unwanted couplings to other lattice sites. This approach offers a pathway to realize multi-orbital models like the Emery model, a longstanding challenge in the field of quantum simulation.

The work proposes a 2D optical superlattice architecture composed of interfering lattices with potentials VX,S = VY,S = VS and non-interfering lattices with potentials VX,L = VY,L = VL. This configuration allows for precise control over the interactions between atoms in different spin states, represented by light and dark gray coloring in the schematic.

Looking ahead, the researchers suggest their architecture provides a platform for exploring the rich interplay between antiferromagnetic Mott insulators and mobile charges, including the superconducting dome characteristic of cuprates. The ability to tune parameters relevant to these materials offers a promising avenue for investigating the particle-hole asymmetry observed in their low-temperature phase diagrams. “Our scheme combines bichromatic and phase-stabilized lattices,” the paper states, “that both have been implemented previously.” This builds on existing technology, offering a refined approach to realizing complex quantum simulations.

Single-Particle Walks Benchmark Tight-Binding Model

The design incorporates both direct and virtual tunneling processes of single particles, allowing for precise benchmarking of the optical lattice parameters and confirming the model’s ability to accurately represent the system’s behavior. This validation step is essential, ensuring confidence in the localized Wannier functions used to describe the electronic states. Comparisons between the band structure extracted from Wannier function overlaps and that obtained by directly solving the Schrödinger equation within the optical potential reveal excellent agreement with the tight-binding model.

The model accounts for tunneling not only within unit cells, using parameters like tpd, tpp, and tpp′, but also between nearest-neighbor cells with terms like tdd, tpp′′, tpd′, and tpd′′. This comprehensive inclusion of tunneling pathways is critical for accurately capturing the complex band structure observed in cuprate materials, and the fidelity of the model is demonstrated by the close match between the two calculation methods.

The system’s ability to tune the competition between orbital degrees of freedom is governed by the ratio Δpd/tpd, opening avenues to explore metal-insulator transitions at temperatures achievable in current experiments. Determinant quantum Monte Carlo simulations predict a charge-ordering temperature within the reach of existing quantum simulators, suggesting the feasibility of experimentally observing these transitions.

The charge gap, δ Ec, is determined by the relationship between Ud and Δpd, enabling investigation of the diverse insulating states found in transition-metal oxides. This level of control is achieved through the manipulation of lattice beam intensities and interference phases, engineering a tight-binding band structure with parameters closely mirroring those found in cuprate superconductors.

The resulting system exhibits a distinct insulating behavior in the undoped regime, differing from that predicted by simpler single-band Hubbard models, and the absence of Fermi surface nesting due to band mixing further distinguishes its properties. Collisions between interacting atoms can induce transitions to non-Emery bands, specifically, the fourth and higher bands of the optical lattice, but the careful design of the superlattice minimizes these unwanted effects.

The researchers demonstrate that the system can be accurately described by a tight-binding model, providing a solid foundation for exploring strongly-correlated electron physics. The ability to learn effective single-band Hubbard models from experimental realizations of Emery models is facilitated by time-evolution quench protocols and classical postprocessing, offering a pathway to simplify complex multi-orbital systems while retaining essential physics.

Hubbard Interactions and Charge-Transfer Energy Tuning

The ability to independently manipulate interactions between electrons is central to engineering desired properties in materials. This work details a method for achieving that control within a quantum simulation. Specifically, the proposed optical superlattice architecture allows for tunable Hubbard interactions, the on-site Coulomb repulsion between electrons, and charge-transfer energy, a critical parameter governing electron movement between copper and oxygen orbitals in cuprate superconductors. The system’s design directly addresses a longstanding challenge in modeling high-temperature superconductivity; simplified one-band Hubbard models, while useful, fail to fully capture the complex behavior of electrons in cuprates.

Accurately representing the interplay of copper and oxygen orbitals, as embodied in the three-band Emery model, is essential for a complete understanding. This is accomplished by carefully manipulating the intensities and interference phases of the lattice beams, effectively “engineering” the orbital degrees of freedom.

The precise control over these parameters allows for exploration of different phases of matter. The simulations reveal that when the charge-transfer energy, Δpd, exceeds the on-site Coulomb repulsion on copper sites, Ud, the system exhibits characteristics of a Mott-Hubbard insulator. Conversely, when Δpd is lowered, a charge-transfer insulator emerges, with low-energy degrees of freedom arising from Zhang-Rice singlets, composite objects formed by electrons on adjacent copper and oxygen sites. This observation suggests the potential for accessing and studying these phenomena in current experiments.

Metal-Insulator Transition and Antiferromagnetic Correlations

The simulations further indicate that as the charge-transfer energy decreases, the occupation shifts towards the oxygen orbitals, altering the electronic landscape. The work highlights the potential for observing this crossover at realistic temperatures, offering a pathway to explore the complex interplay between mobile charges and strong interactions within the multi-orbital system.

The results suggest that the system remains compressible for all accessible temperatures when Δpd/tpd is small, but an incompressible phase appears reminiscent of the charge-transfer insulator as Δpd/tpd increases. The team’s findings provide a framework for interpreting experimental observations and advancing the understanding of these complex materials.

Hamiltonian Learning Infers Single-Band Models

A new Hamiltonian learning protocol allows for the inference of effective single-band Hubbard models directly from experimental realizations of more complex Emery models. The protocol relies on analyzing data from quantum quenches to extract the parameters defining the effective single-band model. The results provide a practical pathway to simulate multi-orbital Hubbard physics with quantum gas microscopes.

👉 More information
🗞 Realizing multi-orbital Emery models with ultracold atoms
✍️ Conall McCabe, Jamie Boyd, Kaizhao Wang, Martin Lebrat, Cindy Regal, Adam M. Kaufman, Ana Maria Rey and Lukas Homeier
🧠 DOI: http://link.aps.org/doi/10.1103/5brd-hw4s

Stay current

See today’s quantum computing news on Quantum Zeitgeist for the latest breakthroughs in qubits, hardware, algorithms, and industry deals.

Avatar of Ivy Delaney

Ivy Delaney

Ivy Delaney has been working with neural networks and machine learning since the mid-nineties, back when a couple of hidden layers and a long afternoon of training counted as ambitious. She has watched the field go from academic curiosity to the thing quietly running underneath everything, and she brings that long view to quantum computing. For Quantum Zeitgeist she covers the ground where the two fields meet. That means quantum machine learning and the variational algorithms it leans on, and it also means the less glamorous but more interesting story of classical machine learning already doing real work inside quantum machines, decoding error-correcting codes, calibrating noisy hardware and learning the error models that simulators depend on. She writes about the hardware those algorithms have to run on too, and about the post-quantum cryptography scramble that the same hardware has set off. Her stories typically start with the paper, whether that is peer-reviewed work, conference proceedings or an arXiv preprint, with the source linked so you can hold a claim up against the research it came from. She is unimpressed by benchmarks that will not say what they beat, and by demonstrations that only work in the press release.

Latest Posts by Ivy Delaney: